Skip to main content

Gripper| Parallel 2 jaws |CH72-NF

Parallel type Small Gripper, stroke from 6 to 10mm

This thin type gripper has synchronized fingers for opening and closing operations thanks to a cam guided by a roller. Consequently, these grippers allow accurate operations even when long attachments are mounted.

They can be mounted with the available tappered holes or with a dedicated mounting support allowing easy adjustment and positionning.


Our wide range of 2-jaws parallel grippers can be used for chucking extremely small parts to biggest ones. Indeed, NKE 2-jaws grippers are available in various sizes, gripping forces and strokes.

Advantages

  • Compact-Lightweight-Fast
  • Silent mechanism
  • Quick and simple integration
  • Large opening angle
  • Position sensors

Benefits

  • No maintenance
  • Very short cycle time
  • Excellent power/volume ratio
  • Low air consumption

CH72-NF
Course5 mm
Air consumption400 mm³
FunctionNormal closed
Max cycle per minute90 cycles
Gripping force*21.000 N
Weight0.090 kg
Max. weight of one attachment0.040 kg
TypeParallel 2 jaws

*The values of gripping force in the above table indicates pressure at the top edge of the fingers when gripping with pressure of 5 bar.

Operating conditions

Working mediaFiltered air
Operating pressure3 to 7 bar
Working temperature5 to 60°C
LubricationNormally not required (but if necessary, use ISOVG32 compliant lubricant)
Repeatability*Initial value : ± 0.1 mm, after 2 million cycles : ± 0.2 mm
Lifetime2 million cycles (with balanced load on each finger)

Notice :The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

No files actually

For more informations

Contact us

No files actually

For more informations

Contact us