Skip to main content

Slip Ring| 8 circuits |SVTS A 06-S-X-00-08

Video, RF coaxial channel, O.D. 22 mm, 8/12 extra electrical signals

This series can transfer up to 12 electrical signals besides one RF coaxial channel from a stationary to a rotating structure. Said channel can transfer up to 3 Gbps and 3 GHz.

These units are available in many standard configurations from 8 to 24 circuits alongside to the coax RF channel. Due to their small ring diameter, the SVTS A 06 series grants low peripheral speed between bushes and rings, as well as reduced dynamic imbalance that means very low wear and long life. For RF signals, the SVTS A 06 series offers a rotating coaxial contact which allows to transfer signals up to 3Gbps depending of the used cable type. SVTS A 06 offers many option letting you choose coax cable and corresponding connectors types.

Unit particuly fit to transmit hi definition video signals (1080p/3G-SDI or 1080i/HD-SDI). Normally used coaxial cables : RG178, RG316 and RG174.


  • Ideal for video, high frequency signals
  • High data rate
  • Gold alloy rings and brushes
  • Low friction torque
  • High lifetime and reliability
  • Compliant to CE and ROHS


  • Integrated RF coaxial connection
  • Optimal signal transmission (gold-gold technology)
  • Combinable with fluidic rotary joints
  • Cost-effective

SVTS A 06-S-X-00-08
Circuits8 x 2A
Outside Diameter22.00 mm
Overall Length (L)29.00 mm
Protection ratingIP 51
Data TransfertRF
MountingFlange / Capsule

Mechanical features

Nominal speed0-250 rpm
Temperature range-20°C to +80°C (-40°C as option)
Contactgold-gold (alloy)
BearingsMiniature high-precision stainless steel ball bearings

Electrical features

Voltage240 VDC/VAC
CablesSilver plated / PTFE insulated / colour coded
Cables length250 mm standard (other length on request)
Dielectric voltage strength500VAC @ 60Hz @ 60 sec
Insulation resistance>500MOhm/500VDC
Dynamic contact resistance<10mOhm @ 6VDC and 500mA (@ 5rpm)
Expected lifetime107 revolutions (depending on speed, environmetal conditions and size)


  • Cables
  • Materials
  • Mechanical design
  • Flange

Notice :The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

No files actually

For more informations

Contact us

No files actually

For more informations

Contact us