• Site en français
  • English site
Products
Distributed brands
Technical support
Information
Contacts
   
 
Two jaw parallel grippers OP... I
    
The OP parallel grippers in this range can clamp the workpiece externally or internally, they are high quality and have been designed to offer the following advantages :
  
° The large, incorporated drive piston combined with a good tapering angle ensures an exceptional clamping force and a considerable jaw stroke.

° The three jaw model is also manufactured in the "S" version which offers an extraordinary clamping force/gripper weight ratio.

° Drill marks on the gripper body to allow for precision mounting with the use of screws and mounting pins.

° A plate protects the control mechanisms from external contacts.

° On request pneumatic drive beating from the cap for feed using rotating distributors, plates etc.

° On request special versions for specific applications, also in small quantities (all made in stainless steel for use with foodstuffs, with cooling circuit for hot workpiece transfer etc.), please contact our Technical Office.

Optional Features :

° External proximity control of the gripper jaw through the use of cylindrical or threaded proximity sensors with brackets and locating pins.

° Safety device with spring incorporated in the drive piston to maintain position without pressure.

Please download the pdf files below for additional optional feature specifications.

 Parallels grippers OP from 35 I to 220 I

Click here to reach the magnetic sensors
Parallels grippers OP... I
° Load-bearing prismatic guides and hardened steel gibs with precision ground connections to guarantee high concentricity and repeatability.

° Jaws with ground reference marks for the fixing of the grippers.

° Inclined plane drive mechanism for excellent performance and prolonged safe functioning and gripping.
 
  OP
35 I		OP
40 I		 OP
48 I		OP
58 I		 OP
74 I		OP
84 I		 OP
94 I		OP
130 I		 OP
150 I		OP
220 I
Stroke per jaw 3
mm		6
mm		 8
mm		10
mm		 13
mm		16
mm		 20
mm		22.5
mm		 24
mm		24
mm
Piston stroke 4.3
mm		8.6
mm		 11.4
mm		14.3
mm		 18.6
mm		22.9
mm		 28.6
mm		32.2
mm		 34.3
mm		34.3
mm
Dual stroke air volume 4
cm3		13.5
cm3		 28
cm3		55
cm3		 114
cm3		172
cm3		 320
cm3		660
cm3		 1040
cm3		2120
cm3
Theoretical clamping force per jaw at 6 bar 185 N305 N 480 N777 N 1245 N1533 N 2253 N4157 N 6262 N12726 N
Actual clamping force per jaw at 6 bar 111 N183 N 288 N466 N 747 N920 N 1352 N2494 N 3757 N7636 N
Theoretical opening force per jaw at 6 bar 206 N338 N 528 N825 N 1310 N1617 N 2385 N4366 N 6468 N13204 N
Actual opening force per jaw at 6 bar 124 N203 N 317 N495 N 786 N970 N 1431 N2620 N 3880 N7922 N
Working pressure 2-12
bar		2-12
bar		 2-12
bar		2-12
bar		 2-12
bar		2-12
bar		 2-12
bar		2-12
bar		 2-12
bar		2-12
bar
Reproducibility +- 0.01 mm+- 0.01 mm +- 0.01 mm+- 0.01 mm +- 0.01 mm+- 0.01 mm +- 0.01 mm+- 0.01 mm +- 0.01 mm+- 0.01 mm
Weight 0.3
Kg		0.5
Kg		 0.9
Kg		1.4
Kg		 2.2
Kg		4.73
Kg		 8
Kg		15
Kg		 21
Kg		34
Kg
Working temperature 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C		5-60
°C
 
  Copyright © 2006 P.E.S. Product Engineering Services S.A. - All rights reserved