• Site en français
  • English site
Products
Distributed brands
Technical support
Information
Contacts
   
 
Two jaw angular gripper version OLE and OF
    
The lever grippers in this range can clamp the workpiece externally and internally and have been designed to offer the following advantages :
  
° The sturdy construction of this OF version combined with the use of top quality materials mean great reliability and little maintenance, even for high work cycles.

° Drilling marks on the body permit precision in side and axial fixing with integrated sensors (reed or inductive on request) to avoid increasing the size.

Note :

° To protect the gripper from overloads that may damage the mechanism, the grippers are to be as light in weight as possible and should not exceed the maximum values of moment of inertia md2 indicated for each model in the technical specifications. Where m = pincer mass in Kg d = distance from pincer barycentre to lever rotation fulcrum It is essential to plan for the use of flow regulators that allow optimum regulation of the opening speed according to the specific application.

Optional Features :

° External proximity control of the gripper jaw through the use of cylindrical or threaded proximity sensors with brackets and locating pins.

Please download the pdf files below for additional optional feature specifications.

 Two jaw angular gripper version OLE and OF

Click here to reach the magnetic sensors
Pinces de préhension angulaire version OLE et OF
° OF version with high angular lever stroke (90° per lever) and regulation of the opening stroke.

° OLE with extremely compact structure and small in size.

° the reference marks for fixing the grippers on the levers allow simple construction and precise positioning.
 
  OLE
12		OLE
16		 OF
20		OF
25		 OF
32
Stroke per jaw 20°20° 80°80° 85°
Piston stroke 3.5
mm		3.5
mm		 12.7
mm		17.3
mm		 21
mm
Dual stroke air volume 0.62 cm31.3 cm3 7.6 cm316.2 cm3 32.2 cm3
Theoretical clamping force per jaw at 6 bar 18.5 N43 N 41 N85.7 N 168.5 N
Actual clamping force per jaw at 6 bar 13 N30 N 28.7 Nm60 Nm 118 Nm
Theoretical opening force per jaw at 6 bar 33 N58 N 46.6 Nm95.5 Nm 186 Nm
Actual opening force per jaw at 6 bar 23 N40.5 N 32.6 Nm67 Nm 130 Nm
Grippers maximum moment of inertia: md2 2.5
Kg-mm²		3.5
Kg-mm²		 11
Kg-mm²		30
Kg-mm²		 84
Kg-mm²
Working pressure 2-8 bar2-8 bar 3-8 bar3-8 bar 3-8 bar
Reproducibility +- 0.05 mm+- 0.05 mm +- 0.05 mm+- 0.05 mm +- 0.05 mm
Weight 0.1
Kg		0.15
Kg		 0.25
Kg		0.45
Kg		 0.78
Kg
Working temperature 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C
 
  Copyright © 2006 P.E.S. Product Engineering Services S.A. - All rights reserved