• Site en français
  • English site
Products
Distributed brands
Technical support
Information
Contacts
   
 
Two-lever toggle gripper OG
    
The OG toggle grippers in this range can clamp the workpiece externally or internally and offer an exceptional clamping force/gripper weight ratio, they are highly versatile and have been designed to offer the following advantages :
  
° Exceptional clamping couple in toggle position (0°).

° This toggle model gripper has been designed to permit the gripping of the piece from the inside (opening) thanks to the original construction which permits reversible mounting according to the type of grip: see examples of application.

° Large surface for fixing of grippers to guarantee extremely safe clamping of the workpiece and only a slight loss of clamping force, even with very long grippers.

° Mechanism guided throughout the stroke.

° Robust construction and the use of top quality materials mean great reliability and little maintenance.

° Drill marks on the gripper body to allow for precision mounting with the use of screws and mounting pins.

Optional Features :

° External proximity control of the gripper jaw through the use of cylindrical or threaded proximity sensors with brackets and locating pins.

Please download the pdf files below for additional optional feature specifications.

 Two-lever toggle gripper OG from 510 to 570-3

Click here to reach the magnetic sensors
Two-lever toggle gripper OG
° Suitable for extremely demanding requirements when a gripper with angular movement is required.

° Non-reversible clamping also in the absence of pressure determined by the special operational mechanism.

 
  OG
510		OG
530		 OG
550-7.5°		OG
550-12.5°		 OG
565		OG
570-8.5°		 OG
570-12.5°		OG
575-8°
Stroke per jaw 7.5°7.5° 7.5°12.5° 7.5°8.5° 12.5°8°
Piston stroke 7
mm		8.5
mm		 12
mm		17.2
mm		 16.7
mm		20.5
mm		 27.5
mm		32.8
mm
Dual stroke air volume 2.7 cm35 cm3 11.5 cm316.5 cm3 26 cm348.5 cm3 65 cm3195 cm3
Force on piston at 6 bar 120 N188 N 294 N294 N 482 N753 N 753 N1870 N
Theoretical clamping couple per jaw at 6 bar 9 Nm18 Nm 9 Nm42 Nm 68 Nm150 Nm 150 Nm630 Nm
Actual clamping couple per jaw at 6 bar 6.5 Nm13 Nm 6.5 Nm30 Nm 48 Nm105 Nm 105 Nm440 Nm
Working pressure 2-8 bar2-8 bar 2-8 bar2-8 bar 2-8 bar2-8 bar 2-8 bar2-8 bar
Reproducibility +- 0.05 mm+- 0.05 mm +- 0.05 mm+- 0.05 mm +- 0.05 mm+- 0.05 mm +- 0.05 mm+- 0.05 mm
Weight 0.17
Kg		0.28
Kg		 0.625
Kg		0.72
Kg		 1.2
Kg		2.55
Kg		 2.72
Kg		6.5
Kg
Working temperature 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C		5-60
°C		 5-60
°C		5-60
°C
 
  Copyright © 2006 P.E.S. Product Engineering Services S.A. - All rights reserved