NKE - Grip parallel cubic profile series CHP390

Home

Grip parallel cubic profile series CHP390

This gripper is miniature parallel and is slimly and is available with longs strokes.

Possibility of mounting magnetic position encoders on the body.

Ordering code

To consult all the technical data of Grip parallel cubic profile series CHP390, download file pdf below.

Grip parallel cubic profile series CHP390

Click here to reach the detectors of position

Precise displacements thanks to important dimensions of bearing pressure of the mors and to the strong rigidity of the guidance of the mors.

The grip can be fixed on all its faces.

Specifications

	CHP391	CHP392	CHP393
Working media	Filtered air
Operating pressure	3 at 7 bar
Ambient temperature	5 at 60 C°
Lubrication	Normally not required. (But if necessary, use 1st sort of turbine oil equivalent of ISO VG32)
Repetitive accuracy	Initial value : +- 0.1 mm, At 2 million cycles : +- 0.2 mm
Life	2 million cycles on condition that the load is evenly applied to each finger
Cylinder bore	6 mm	10 mm	15 mm
Stroke	26 mm	40 mm	60 mm
Exhaust volume	0.5 cc	2.1 cc	6.1 cc
Max. cycle per minute	90		60
Fingers' movement	Double acting
Gripping force : close	(P-0.08 N)(24-2.3 l)	(P-0.03 N)(70-5 l)	(P-0.02 N)(157-7 l)
Weight	90 g	210 g	525 g
Max. length of attachment from finger end	2.5 cm	4 cm	6 cm
Max. weight of one attachment	30 g	60 g	100 g