Home
Products
Distributed brands
Technical support
Information
Contacts
Parallel type Square Gripper CHP230 series
This gripper is designed compactly with strong gripping force and wide range strokes.
Ordering code
To consult all the technical data of parallel type Square Gripper CHP230 series, download file pdf below.
Parallel type Square Gripper CHP230 series
Click here to reach the detectors of position
They consist of 6 types with 2 kinds of strokes and 2 kinds of fingers' orientations (Horizontal and Vertical) respectively.
Dust seals are contained for protecting the rods' thresholds from dust.
Contactless type of magnetic proximity switch can be fixed inside of the T shape grooves of the body.
Specifications
CHP231
CHP232
CHP233
CHP234
CHP235
CHP236
Working media
Filtered air
Operating pressure
3 at 7 bar
Ambient temperature
5 at 60 C°
Lubrication
Normally not required. (But if necessary, use 1st sort of turbine oil equivalent of ISO VG32)
Repetitive accuracy
Initial value : +- 0.1 mm, At 2 million cycles : +- 0.2 mm
Life
2 million cycles on condition that the load is evenly applied to each finger
Cylinder bore
2x10 mm
2x12 mm
2x16 mm
2x20 mm
2x25 mm
2x30 mm
Stroke
10 mm
20 mm
20 mm
40 mm
30 mm
60 mm
40 mm
80 mm
50 mm
100 mm
60 mm
120 mm
Exhaust volume
0.65
cc
1.25
cc
1.9
cc
3.5
cc
5.2
cc
10.1
cc
9
cc
17.9
cc
19
cc
38
cc
32
cc
64
cc
Max. cycle per minute
60
Fingers' movement
Double acting
Gripping force : Close, Open
(P-0.16 N)
(80-3 l)
(P-0.14 N)
(140-5 l)
(P-0.09 N)
(250-11 l)
(P-0.07 N)
(320-10 l)
(P-0.06 N)
(550-17 l)
(P-0.03 N)
(830-18 l)
l : Attachments' length from the end of finger to the center of the work (cm)
Weight
180
g
200
g
305
g
356
g
490
g
590
g
1165
g
1435
g
2010
g
2400
g
3075
g
3710
g
Max. length of attachment from finger end
3 cm
4.5 cm
7.5 cm
10 cm
12 cm
15 cm
Max. weight of one attachment
50 g
75 g
200 g
400 g
500 g
600 g
Copyright © 2006 P.E.S. Product Engineering Services S.A. - All rights reserved
Products
