NKE - Lever type Small Gripper CH25

Lever type Small Gripper CH25

This gripper is designed compactly and slimly, nevertheless it has a strong gripping force.

Ordering code

To consult all the technical data of lever type Small Gripper CH25, download file pdf below.

Clamping the gripper with a half split metal makes it easy to adjust its height and orientation.

	CH25
Working media	Filtered air
Operating pressure	3 at 7 bar
Ambient temperature	5 at 60 C°
Lubrication	Normally not required. (But if necessary, use 1st sort of turbine oil equivalent of ISO VG32)
Repetitive accuracy	Initial value : +- 0.1 mm, At 2 million cycles : +- 0.2 mm
Life	2 million cycles on condition that the load is evenly applied to each finger
Cylinder bore	10 mm
Open angle	14 degree
Exhaust volume	0.4 cc
Max. cycle per minute	60
Fingers' movement	Single acting : Normally open
Gripping force : close	60(P-0.15 N)/l
Gripping force : open	3.5/l
	l : Length of attachment from the fulcrum of fingers to the center of the work (cm)
Weight	34 g
Max. length of attachment from finger fulcrum	4 cm
Max. weight of one attachment	20 g