NKE - Lever type Thin Gripper CH02

Lever type Thin Gripper CH02

This gripper is long selling for over 20 years.

Dust cover can be provided to protect the gripper from dust and water.

Ordering code

To consult all the technical data of lever type Thin Gripper CH02, download file pdf below.

Clamping the gripper with a half split metal makes it easy to adjust its height and orientation.

	CH02-NO	CH02-NF
Working media	Filtered air
Operating pressure	3 at 7 bar
Ambient temperature	5 at 60 C°
Lubrication	Normally not required. (But if necessary, use 1st sort of turbine oil equivalent of ISO VG32)
Repetitive accuracy	Initial value : +- 0.1 mm, At 2 million cycles : +- 0.2 mm
Life	2 million cycles on condition that the load is evenly applied to each finger
Cylinder bore	10 mm
Open angle	15 degrees
Exhaust volume	0.31 cc
Max. cycle per minute	60
Fingers' movement	Single acting : Normally open	Single acting : Normally closed
Gripping force : close	250(P-0.24 N)/l	10/l
Gripping force : open	10/l	250(P-0.24 N)/l
	l : Length of attachment from the fulcrum of fingers to the center of the work (cm)
Weight	140 g