 |  |
 | |
| | | |
| |
|
|
|
| |
|
The FLEXITOOL is designed for the efficient deburring of bore-intersections and bore surfaces.
° Drills or reamers can be inserted without problems in bores due to the Floating chuck.
° The floating chuck can compensates radial and angular misplacement errors between bore and tool axis when inserting the tools.
° The FLEXITOOL 270 is axially movable. The necessary feed forward force can be set by the program control. Because of that the drill or the reamer is freely compliable in all directions.
° The deburring tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm. If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available in PES.
° To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.
To consult all the technical data of the FLEXITOOL serie 200, download file pdf below.
  The FLEXITOOL serie 200
|
 |
| |
|
| Type | FLEXITOOL 250 | FLEXITOOL 270 |
| Article n° | 3145.250 | 3145.270 |
| Power | 830 W (1.11 hp) |
| Idling speed | 570 rpm |
| Rated speed | 290 rpm |
| Compliance movement | | 16 mm axial |
| Compliance force | | ca. 135 N (30.4 lbs) / at 6 bar (87 psi) |
| Air consumption | 17 l/s (36 cfm) |
| Air connections | G1/4'', 12 mm / 4 mm |
| Tool mounting | Mandrin ER 25 / Ø 8 mm |
| Weight | 2.5 kg (5.5 lbs) | 7.0 kg (15.4 lbs) |
| Sensor | 24 V, inductive |
| |
| Reamers and other speeds on request |
 |
|
| |
|
Products